How to correctly use rotary drilling pipe must pay attention to matters

Rotary drilling pipe plays a vital role in civil engineering, but the following items should be paid special attention to when using
1. Select the appropriate drill specifications: Select the appropriate rotary drilling pipe specifications according to specific engineering needs to avoid construction problems caused by using too thick or too thin drill pipes.
2. Regularly check the wear of the drill pipe: During use, check the wear of the drill pipe regularly. If the wear is serious, it should be replaced in time to ensure construction efficiency and safety.
3. Properly store and maintain the drill pipe: When the rotary drilling pipe is temporarily stopped, it should be stored correctly and avoid damage. At the same time, the drill pipe should be cleaned and maintained regularly to extend its service life.
4. Careful operation of rotary drilling equipment: when using rotary drilling pipe, the operator should strictly follow the operating procedures to avoid accidents caused by operational errors.
5. Pay attention to the drilling depth and drilling angle: In actual construction, the depth and angle of the drilling should be accurately controlled according to the design requirements to ensure the construction quality.
6. Do a good job in the construction site safety protection: in the process of using rotary drilling pipe, to do a good job in the corresponding safety protection measures, to ensure the safety of construction personnel and equipment.
In short, the correct use of rotary drilling pipe can not only improve the construction efficiency, but also ensure the safety of construction. It is hoped that the construction personnel can strictly abide by the operating procedures and pay attention to the above matters to ensure the smooth progress of the construction.